Instruction Manual

Winnerwell® Portable 20L Camping Solar Shower Bag

◎ SKU: 910557 ◎ Product Name: Winnerwell® Portable 20L Camping Solar Shower Bag ◎ Capacity: 20L / 5.3gal (US) ◎ Assembly Dimension: Ø250mm×480(H)mm / Ø9.8in×18.9(H)in ◎ Stowed Dimension: Ø260mm×156(H)mm / Ø10.2in×6.1(H)in ◎ Material:TPU ◎ Net Weight: Approx. 3.7kg / 8.16lbs

■ Part Details

Please check all parts before use, if there are missing or damaged parts, please contact the seller.

Shower Bag ×1	Shower Head ×1	Foot Pump ×1	Shoulder Strap ×1	Carry Bag ×1

■ How to Use

 1. Open the Cap and Fill with Water

Open the cap and fill with clean water (max 20L).Close securely.

2.  Place Under Sunlight to Heat  Water

Place the bag under direct sunlight for about 2 hours. Check the temperature indicator before use.

3. Connect the Hoses to the Bottom Ports

① Press and hold the button.

② Insert the connectors.

Connect the foot pump hose and shower hose to the bottom ports.  Ensure all connections are fully secured.

4. Open the Pump Cap and Pressurize

① Open the foot pump cap.

② Step on the pump to pressurize.       Stop when resistance is felt.

5. Adjust Water Flow

Slide the switch on the shower head to control water flow(continuous or adjustable mode).

Slide the switch up for continuous water flow.

Slide down to stop or adjust flow.

WARNINGS & CARE

● For outdoor use only. Not for drinking water.
● Always check water temperature before use. Mix with cold water if too hot.
● Do not exceed 50°C / 122°F water temperature.
● Keep away from sharp objects to prevent punctures or leaks.
● Use a strong support point when hanging. A full bag may weigh up to 20kg.
● Ensure the air hose is securely connected to the valve before use.
● Stop pumping when resistance is felt to avoid overpressure.
● Drain and dry completely before storage.
● Rinse after use to maintain hygiene and product life.
● Heating time depends on sunlight and weather conditions.